Brand: TOYAN
.Item: V8 Nitro Engine FS-V800
.Cylinder: V-type 8 Cylinder
.cylinder diameter:16.6mm
.Stroke: 17.0mm
.Displacement: 28cc (3.5cc x 8)
.Speed Range: 1800-12500rpm
.Output Power: 4.35ps@11200rpm
.Cooling System: Water-cooled
.Starting Method: Electric Start
.Material: Metal
.weight: 2050g
As we There are two types of V8 engines because of the different crankshafts.
The vertical plane is a typical V8 structure in American traffic vehicles. In a group (every group of 4), the angle between each crank and the previous one is 90°, so it is a vertical structure when viewed from one end of the crankshaft. This vertical plane provides good balance, but requires a heavy weight iron. Because of the large rotational inertia, the V8 engine with this vertical plane structure has a lower acceleration, and cannot accelerate or decelerate quickly compared to other types of engines.
Flat means that the crank is 180°. They are not perfectly balanced, and the vibrations are very high unless a balance shaft is used. Because no counterweight iron is required, the crankshaft has a small weight and low inertia, and can have high rotational speed and acceleration. This configuration is common in the 1.5-liter modern racing Coventry Climax, where the engine evolved from a vertical to a flat configuration.
Toyan choose to use the 90° crank for the v8 engine model.
Cross crankshaft design, perfectly showing the style of American muscle car
The middle planed is the crankshaft bearing support. Stirlingkit team has asked Toyan to test the crankshaft of the new rotary engine individually with the help of equipment. After the installation is complete, the crankshaft is violently pulled at high speed and tested for strength. Please note that the crankshaft of Toyan FS-L400 is different from that of the rotary engine.
New dual carburetor design with reservoir pump membrane provides even fuel distribution
Precise valve control, providing more stable speed and throttle response
Integrated exhaust manifold, more robust sound
Players can choose to assemble the DIY version by themselves and the factory-assembled completed version
Want to know the Toyan V8 Nitro Engine Price?
Let’s check the price of the 1/4 V2 engine model in the current market first.
conley V8 not available.
CHALLENGER V8 FLATHEAD ENGINE (Coles v8) price 9500$usd
RCH 1/4 SCALE SUPERCHARGED V8 – RTR $6,999.00
QS-V8SINGLE-KIT 1/4 SCALE V8 NITRO POWERED SINGLE CARBURETOR WORKING ENGINE KIT VERSION
$3,799.00
QS-V8SINGLE 1/4 SCALE V8 NITRO POWERED SINGLE CARBURETOR WORKING ENGINE
$3,899.00
QS-V8TWIN 1/4 SCALE V8 ENGINE WITH TWIN CARBURETORS
$3,999.00
Toyan have released the price yet. but i think it will be about 2000-2500$usd because the Toyan v4 engine costs 1399.99$usd.
Some Common Questions People Also Might Ask
1) Can you share the basic infomation of this FS V800?
This V8 engine has two version, that is DIY version and pre-assembled version; scale 1/10; use nitro (methanol) fuel. (Users need to prepare 20-25% nitro fuel by themselves)
2)What’s Lubrication method of Toyan v8 engine?
Unfortunately, it is still the same as the L400, with mixed splash lubrication and no independent lubrication system. Just add a small amount of grease to the camshaft.
3) Is it water cooling of FS V800?
Toyan v8 engine is designed for mainly desktop power on the basis of the FS-L400 four-cylinder engine, so it is a water-cooled version. It has a built-in mechanical water-cooling pump. The power of the pump body comes from the crankshaft to provide circulating power for the coolant. (Users need to prepare their own water cooling accessories)
4) Is there any special on the design of the exhaust pipe of FS V800?
It adopts all-metal small integrated exhaust manifold, which is welded instead of metal printed parts. Please note that this process is very difficult and it costs a lot to lower the exhaust manifold defect rate.
5)What carburetor have you used for FS V800?
The carburetor is a newly designed carburetor with a pump, which is different from the L400.
6)What’s the crank structure of Toyan V800?
It adopts a 90-degree cross-type crankshaft structure (at present, most of our domestic ones are cross-type, and performance machines generally use a straight-line crankshaft, such as Ferrari V8)
7) Have you used any support for the crankshaft on Toyan V800?
yes. We did. i know what you are worried about. Toyan use the pain point of crankshaft support. That means the crankshaft of the V8 adopts an integrated design, which is thickened, and there is a support point in the middle of the crankshaft. Because Toyan doesn’t want to repeat the same mistakes as the four-cylinder.
8) I don’t like methanol engine, I want gasoline engine. Can you please make a gasoline version.
Sorry to tell you that this FS V800 engine is nitro powered. And glad to tell you that D-axis extension is adopted on the side of cylinder head, in order to introduce OP upgrade parts later to facilitate users to change gasoline version.
9) Are there other color options except the black and red color of the FS-V800 Engine?
The basic V8 is the classic red and black color scheme. But Toyan will consider making different colors. Any ideas are welcome.
10) Will there be a supercharger in the future for the FS-V800 Engine?
Toyan team is designing the supercharger, as an OP upgrade which will be launched soon after the engine is released.
9) Which rc car is the V8 engine suitable for?
According to the size of the engine, it is probably suitable for rc cars with a ratio of about 1/5 and 1/6. Toyan doesn’t have a car frame for it. so I recommend you modify it yourself.
10) The toyan V8 uses a single camshaft structure like the four-cylinder engine. Will the V8 with a double camshaft structure be launched in the future?
Yes. this Toyan FS V800 uses the single camshaft structure. I think it’s not easy to make a double camshaft structure into the v8 engine model. It seems like that it’s a dream for RC hobbyists to have a nitro/gasoline-powered DOHC V8 engine. We will be launching several V8 products in the future if possible.
11) Why there is a v8 photo on the top of on the air filter?
The pattern on the air filter is the v8 side view pattern. It is estimated that the totem is added to prevent the top of the air filter from being too monotonous. do you like it?
12) Is there any chance you will do an 180deg crank-kit to it? I would really love that! I mean for the Toyan V8. You have 90deg crankshaft on it. It would sound much More like a race engine of it where 180deg crank. A new crankshaft and two cam skafts is all that is needed. Are you concidering that? You could sell it as an option kit. I would buy directly!
Reviews
There are no reviews yet.